Audersigt Wireless Adjustable Stroke Tattoo Gun Machine Battery 2000mAh Tattoo Pen Machine

Features

• Adjustable stroke in six positions, 4.5,4.2, 3.8,3.2, 2.7,2.3mm, Gently rotate the stroke marking section to the left/right. 6-step needle stroke adjustment
  
• 2000mAh high capacity battery
  
• lPS color screen Two functions in one, three-speed memory mode
  Product Parameters

Product parameters

Product weight: 220g
Product size: 32mm * 133mm
Battery capacity: 2000mAh
Output voltage: 4-12V
Output Current: 2A
Product material: aviation aluminum alloy
Total package weight: 520 g
Package dimensions: 16×16×5 cm

Key operation:

1、When the machine is turned off,long press K2 to turn on the machine: without Jump-start mode;doubleclick K2 to turn on the machine: with Jump-start mode;
2、When the machine is turned on, long press K2 to turn off the machine,and the machine enters the low.power hibernation state.
3、When the machine is turned on and the motor is turned on, short press orlong press K1/K3 to increase or decrease the current output voltage value.
4、When the machine is turned on and the motor is off, short press K1/K3 to switch 3 groups of memory voltages cyclically.
5、When the machine is turned on and the motor is off,long press K1/K3 to set the current memory voltag value.

Protection Tips:

LOW POWER: Battery low battery protection alert.
OVER LODAD: Motor machine overload protection alert.SHORT OUT: Motor machine short circuit protection alert.
Note: When the above protection is triggered, the above message will be shownat the top of the display.

Please notice:

➤1. This machine does not support disassembly. If it is damaged by unauthorized disassembly, it is not within the scope of the warranty policy.
➤2. The battery of this machine does not support removal.
➤3. When charging, follow the input specifications, use a 5V 2A adapter to charge (normal mobile phone chargers are sufficient, except mobile phone fast chargers)
➤4. Only the handle of this machine supports high-temperature disinfection after disassembly. Do not perform high temperature disinfection on the entire machine.